Space King XL Valve-less Terp Slurper

A standard terp slurper features a central vacuum tube inside the slurper column that creates a pressure differential to pull concentrate upward. The valve-less version removes this internal tube, leaving an open channel throughout the column. This allows for less restricted airflow and makes loading concentrates more straightforward, while still maintaining the multi-chamber slurper vaporization effect.

The 3.5-inch extended tube provides more vertical distance between the base dish and the joint connection, which means vapor travels further before entering the water pipe. This extended path allows the vapor to cool slightly before inhalation. The larger column volume also accommodates larger concentrate loads, making this banger well suited to heavier dab sessions.

Fully fused indicates that the banger is constructed from a single continuous piece of quartz rather than having the bucket and joint stem attached by a separate weld. This one-piece design eliminates the most common structural weak point on quartz bangers. Fully fused bangers tend to be more resistant to cracking at the joint connection during repeated heating and cooling cycles.

The Space King XL Valve-Less Terp Slurper Kit includes the fully fused XL terp slurper banger with a 14mm male joint, a ball-style carb cap, and a quartz bead. The ball cap controls airflow at the top of the slurper and the quartz bead adds heat retention and can agitate concentrate inside the column during the dab.

Heat the bottom dish of the slurper with a torch for 20 to 30 seconds, then allow 30 to 45 seconds of cool-down. Drop the quartz bead into the slurper column and place the ball cap on top to seal the opening. Apply concentrate to the bottom dish using a dab tool, then inhale. The airflow drawn in through the base slits will pull the concentrate up through the column for efficient vaporization.

After each session, while the banger is still warm, use a cotton swab with isopropyl alcohol to wipe residue from the bottom dish and the interior walls of the column. For a full cleaning, remove the quartz bead and soak the entire banger in isopropyl alcohol for 20 to 30 minutes to loosen any built-up oil, then rinse thoroughly with warm water and allow to dry before the next use.