Space King Fully Fused Long Barrel Terp Slurper

A terp slurper banger has a lower dish and vertical tube that pulls concentrates upward during inhalation through precision air slits. The long barrel version extends the neck between the dish and the joint, keeping heat further from the rig body, allowing vapor to cool slightly before reaching the water, and giving the piece a visually distinctive profile compared to standard-height slurpers.

This banger uses a 14mm male joint, which fits any dab rig or water pipe with a 14mm female joint. It is available in both 45-degree and 90-degree angle options depending on the listing, so confirm the angle of your rig before purchasing to ensure a level fit.

Place the terp pearls into the lower dish of the slurper before heating. After the banger reaches the correct temperature and cools slightly, load your concentrate into the dish, then place the ball cap on top. Inhaling creates suction that spins the terp pearls and draws concentrate upward through the air slits for thorough vaporization.

Fully fused means the banger is made from a single continuous piece of quartz rather than two sections joined at a weld point. Heat distributes more evenly throughout the piece, the structural weak point that exists at a standard weld joint is eliminated, and the banger generally lasts longer under repeated heating cycles.

Focus your butane torch on the bottom dish of the slurper for 20 to 30 seconds. Because the barrel is longer, some users also heat the lower tube briefly to warm the full interior. Allow 30 to 50 seconds of cooldown before loading your concentrate into the dish for a low-temperature dab.

After each use, drop a cotton swab dampened with isopropyl alcohol into the dish and lower tube while the piece is still warm to remove residue before it hardens. For a deeper clean, submerge the banger in high-proof isopropyl alcohol for 20 to 30 minutes, then rinse with warm water and dry fully before storing or reusing.