Quartz Banger Nail – 45 Degree

This quartz banger nail uses a 14mm male joint. It is designed to pair with dab rigs and water pipes that have a 14mm female joint. Before purchasing, confirm that your rig uses a 14mm female joint so the banger seats securely without any air gaps. The 14mm size is the most common joint size found on mid-size dab rigs and banger hanger water pipes.

The 45 degree joint angle is best suited for beaker bongs, straight tubes, and any rig with a downward-angled joint. When you insert a 45 degree banger into this style of rig, the bucket sits at a comfortable working angle that keeps your concentrate in the base of the bucket and allows easy access for loading with a dab tool. Using a 90 degree banger on a 45 degree joint can result in a poor seal and wasted vapor.

A flat top banger creates a flush, even surface along the top edge of the bucket. This flush edge allows a wide variety of carb caps to form a tight seal over the opening, which traps vapor inside and forces it through the concentrate for full vaporization. Flat tops are compatible with bubble carb caps, directional airflow caps, and standard disc-style caps, giving you flexibility when choosing accessories for your setup.

The walls of this banger measure 3mm thick. A 3mm quartz wall provides a good balance between heat-up time and heat retention. The banger heats to working temperature relatively quickly with a butane torch, and it retains enough heat to fully vaporize low-temperature dabs. Thicker quartz generally holds heat longer, which is ideal for low-temp dabbing enthusiasts who prefer slow, flavorful draws.

After each use, wait for the banger to cool, then wipe the inside of the bucket with a dry or isopropyl alcohol-dampened cotton swab. This Q-tip technique removes residual oil before it carbonizes and turns the quartz dark. For deeper cleaning, soak the banger in 91 percent or higher isopropyl alcohol for 20 to 30 minutes, rinse with warm water, and allow it to dry completely before use. Avoid thermal shock by never submerging a hot banger in liquid.

Yes, the flat top quartz design works well for cold start, also called reverse dabbing. In this method, you load your concentrate directly into the room-temperature bucket, cap the banger with a carb cap, and then apply heat from below with a butane torch until the concentrate begins to bubble and vaporize. Cold start dabs generally produce more flavorful vapor at lower temperatures, which also helps extend the life of the quartz by reducing thermal stress from over-torching.