Pulsar Quartz Thick Bottom Banger with Bevel – 14mm M 90 Degree

The 5mm thick quartz bottom disk provides significantly more thermal mass than a standard 2mm bottom banger. This increased mass absorbs more heat during the torch phase and then releases that heat more slowly and evenly once the torch is removed. The result is a longer-lasting stable temperature zone that helps vaporize concentrates more completely and reduces the likelihood of having to reheat mid-session.

The beveled top edge of the bucket angles slightly inward, creating a sealing surface that mates tightly with round bubble carb caps and ball carb caps. This tight seal restricts airflow at the top of the bucket, allowing you to control how much outside air enters and how the vapor circulates inside. A better carb cap seal generally leads to more efficient vaporization and more flavorful dabs at lower temperatures.

Bubble carb caps and round ball carb caps are the ideal pairing for a beveled-top banger. Their spherical shape creates a natural seal against the angled rim, allowing you to direct airflow by tilting and rotating the cap. Flat-top carb caps can also work but may not form as complete a seal against the beveled edge as a rounded cap would.

The Pulsar Quartz Thick Bottom Banger with Bevel has a 14mm male joint at a 90-degree angle. It connects directly to dab rigs and water pipes that have a 14mm female joint. Make sure your rig has a female joint rather than a male joint before ordering, and confirm the 90-degree angle suits your rig configuration.

Yes, the thick quartz bottom makes this banger well suited to cold-start dabbing. Load concentrate into the unheated bucket, place the carb cap on the beveled rim, then apply gentle heat to the bottom from below. The thick bottom heats slowly and evenly, which helps avoid scorching the concentrate and preserves flavor. Once vapor begins forming, remove the torch and continue inhaling.

Allow the banger to cool completely before cleaning to avoid thermal shock. Once cool, use a cotton swab soaked in isopropyl alcohol to wipe out concentrate residue from the bucket interior. For heavier buildup, soak the entire banger in isopropyl alcohol for 20 to 30 minutes, then rinse with warm water and allow to air dry. Avoid using water while the banger is still hot.