Pulsar Quartz Banger – Cellular Mosaic Etched

The cellular mosaic pattern is a geometric etching on the exterior surface of the quartz bucket that resembles an organic cell or bubble structure. The design is precision-etched directly into the quartz and does not affect the interior surface or heat distribution. It is a purely decorative element that gives this banger a distinctive scientific aesthetic compared to standard clear quartz bangers.

No, the etching is applied only to the exterior surface of the quartz and does not alter the wall thickness, interior geometry, or heat retention properties of the banger. All performance characteristics including heat-up time, temperature stability, and vapor quality remain identical to a standard clear Pulsar quartz banger with the same 25mm OD and flat-top design.

The flat-top edge of this banger is compatible with most standard flat carb caps, directional airflow caps, and marble-style carb caps sized for 25mm or larger buckets. A flat carb cap resting on top of the flat edge creates a reasonable seal, while a bubble cap placed inside the bucket opening can also restrict airflow for low-temperature dabs.

The Pulsar Cellular Mosaic Etched Banger has a 14mm male joint at a 90-degree angle. This configuration fits rigs with a 14mm female joint that points straight upward, such as straight-tube rigs, banger hangers, and most recycler rigs. Verify your rig’s joint size and angle before purchasing to ensure compatibility.

Yes, the 25mm outer diameter and 21mm inner diameter of this flat-top banger provide enough space to drop in 4mm or 6mm terp pearls. Using a directional airflow carb cap or a spinner cap helps keep the pearls spinning inside the bucket for improved heat distribution and more even concentrate vaporization throughout the session.

Clean the banger after each session with an isopropyl alcohol-soaked cotton swab while it is still warm but not hot. The exterior etching creates slightly more surface texture than a plain banger, so take care to wipe down the outside of the bucket as well to prevent residue or carbon buildup from accumulating in the pattern. For deeper cleaning, soak in 91% or 99% isopropyl alcohol for 20 to 30 minutes and rinse with warm water.