Pulsar Beveled Edge Quartz Banger

The beveled edge is a slight inward taper at the opening of the bucket that provides more contact surface for a bubble-style or ball carb cap to rest against. When the rounded bottom of a bubble cap is placed over the beveled rim, it creates a tighter, more consistent seal than a flat cap on a flat top banger. This tighter seal traps more heat and vapor inside the bucket, which is essential for low-temperature dabbing.

The bottom of this banger measures 5mm thick. This is more than double the thickness of a standard 2mm bottom banger. The additional quartz mass at the base absorbs more thermal energy during heating and releases it more slowly, which keeps the concentrate at an optimal vaporization temperature for a longer period after the torch is removed.

The bucket on this banger has a 25mm outer diameter, which is the standard size for most carb caps sold on the market. Bubble caps, ball caps, and directional flow caps with a diameter of 25mm or larger will fit over the beveled opening. A snug-fitting bubble cap is the most commonly recommended pairing for a beveled edge banger.

Yes, this banger features a subtly embossed Pulsar logo on the underside of the bucket, visible only when looking down into the bucket from above. This is a design detail that does not affect the interior surface of the quartz or interfere with concentrate loading and vaporization.

This banger is available in 14mm male and 14mm female joint configurations at a 90-degree angle. The male version inserts into a female-jointed rig, while the female version accepts a male-jointed nail. Most standard dab rigs have a female joint, so the male version of this banger is the more commonly used configuration.

Yes, cold-start dabbing works well with thick-bottomed bangers. Load the concentrate into the cold bucket, place the carb cap on top, and apply the torch from below the bucket. The 5mm base heats relatively evenly from a cold state and the concentrate begins to vaporize as the temperature rises. Remove the torch once vapor production begins and adjust airflow with the cap as needed.