Honeybee Herb Quartz Kettle Banger – 90°

Most flat-bucket bangers have a uniform outer diameter from top to bottom. The Honey Kettle banger has a narrower 20mm diameter at the opening that widens to a 25mm diameter at the base, similar to the tapered shape of a kettle. This geometry creates a tighter space above the concentrate at the top opening, which reduces the volume of air that needs to be drawn through the banger and concentrates the vacuum pull around the vaporizing material for more efficient sessions.

Honeybee Herb recommends the 25mm Honey Bubble Cap as the ideal carb cap for this banger. The 25mm diameter matches the base outer diameter of the Honey Kettle, and the bubble-style cap creates an effective seal that covers the narrowed top opening. The beveled edge at the top of the banger also helps retain rounded bubble caps and marble-style caps for directional airflow control.

Yes. Because the Honey Kettle has a wide 25mm base, it has sufficient floor space to accommodate terp pearls of various sizes. The kettle shape actually provides good conditions for pearl spinning, since the narrow top combined with a properly sealed carb cap creates focused airflow that can keep pearls in motion at the wider base level during inhalation.

Yes. The wider 25mm base provides more surface area at the bottom for loading concentrate than a standard 20mm narrow-bucket banger, while the tapered profile keeps vapor close to the concentrate during vaporization. This makes it well-suited for moderate to larger dab sizes. The 3mm wall thickness also supports the heat retention needed to fully vaporize larger concentrate loads without the banger cooling down too quickly mid-dab.

The geometry and dimensions of the Honey Kettle bucket are identical across both angle configurations. The only difference is the joint angle: the 90-degree version is for dab rigs with a perpendicular 90-degree female joint, while the 45-degree version is for angled beaker or bubble-base rigs. Select the angle that matches your rig’s downstem angle for the correct horizontal bucket position.

Clean the Honey Kettle the same way as any other quartz banger: use an ISO alcohol-soaked Q-tip after each session while the banger is still warm to remove residue before it hardens. The tapered inner shape of the kettle bucket does not present any additional cleaning challenges. For a deeper clean, soak the full banger in isopropyl alcohol for 15-20 minutes and rinse with warm water, then allow to air dry completely before use.