GRAV Quartz Slurper Bucket – 10mm 45°

The GRAV Slurper Bucket uses a dual-cylinder design consisting of a wider outer quartz cylinder surrounding a narrower inner tube, with the space between them connected to laser-cut directional air intakes. This geometry creates a channel for airflow to enter from the sides at an angle, producing a whirling vortex within the inner chamber during inhalation. The spinning effect improves concentrate distribution and vaporization efficiency, particularly for larger dab portions loaded into the bottom dish base.

This banger uses a 10mm male joint at a 45-degree angle, designed for dab rigs and water pipes with a 10mm female 45-degree joint. The 10mm configuration is typical of compact and mini rigs, and the 45-degree angle pairs with rigs that have angled downstems. Always verify both measurements on your rig before purchasing to ensure the bucket sits at the correct orientation for effective concentrate loading and airflow through the directional intakes.

The GRAV Slurper Bucket is specifically designed for low-temperature, larger-portion dabs. The thick gathered dish base retains heat effectively for extended vaporization time, allowing bigger concentrate loads to vaporize more completely at lower temperatures. The bottom-loading intake and dual-cylinder airflow system are optimized for this use case. For very small concentrate portions, a standard flat-top banger with a smaller bucket diameter may be more efficient.

A marble-style carb cap that seats over the top of the inner cylinder opening is the standard choice for slurper-style bangers. The GRAV Quartz Slurper Bucket Set 10mm 45 is available separately and includes a matched 20mm quartz marble and terp pillar insert that are verified to work with this banger profile. The marble seals the top to restrict airflow to the directional intakes, while the terp pillar sits inside the inner cylinder to increase surface area for vaporization.

Concentrate is loaded into the slurper bucket through the bottom dish, which serves as the loading area for this style of banger. After the dish base has reached the desired temperature and cooled to the appropriate dabbing temperature, use a dab tool to place your concentrate directly into the dish at the bottom of the inner cylinder. As you inhale, the directional air intakes pull the melted concentrate upward through the inner chamber for vaporization, which is the fundamental mechanism of the slurper design.

After each session, use a cotton swab moistened with isopropyl alcohol to clean the dish base and the interior of the inner cylinder. The space between the inner and outer cylinders requires attention as well, and a slim swab or pipe cleaner soaked in isopropyl alcohol can help reach that area. For deeper cleaning, soak the entire banger in isopropyl alcohol for 30 to 60 minutes, then rinse thoroughly with warm water and allow to dry completely. Consistent post-session cleaning prevents residue from hardening in the dual-cylinder channel and maintains optimal airflow performance.