GRAV Quartz Hybrid Bucket – 10mm 90°

A hybrid bucket banger combines elements of both round-bottom and flat-bottom bucket designs. A standard flat-bottom banger has a fully flat base, while a round-bottom has a curved interior. The hybrid profile creates a bowl-like interior curve at the base that transitions into a flat perimeter, promoting more even heat distribution across the quartz surface and reducing pooling of concentrate in a single spot. The result is more efficient vaporization and better use of your concentrate per session.

This banger is designed for small dab rigs and mini rigs that feature a 10mm female joint with a 90-degree angle. The 10mm joint size is most commonly found on compact, travel-sized rigs and is smaller than the standard 14mm joint. If your rig has a 10mm female joint at a 90-degree angle, this GRAV banger is a direct fit without any adapters required.

Use a butane torch to heat the outside of the quartz bucket evenly, moving the flame in a circular motion around the base and lower walls for approximately 20 to 30 seconds or until the quartz begins to glow slightly. Remove the flame and allow the banger to cool to your preferred dab temperature before adding concentrate. For low-temp dabs, wait 30 to 45 seconds after torching before applying concentrate for optimal flavor and minimal waste.

Yes, the GRAV Quartz Hybrid Bucket is compatible with terp pearls. Given the 10mm joint size, smaller pearls in the 4mm range are most appropriate for use inside this compact bucket. Terp pearls spin during inhalation to redistribute concentrate across the bucket walls, improving vaporization efficiency and flavor. Use a directional carb cap to create the airflow necessary to spin the pearls effectively.

The GRAV Quartz Hybrid Bucket is a standalone banger and does not include accessories. However, GRAV accessories such as quartz marbles and terp pearl sets are available separately and are compatible with this banger. For the best performance, pair it with a carb cap sized appropriately for the bucket opening to maximize airflow control and concentrate efficiency during each session.

After each session, swab the inside of the bucket with a cotton swab dipped in isopropyl alcohol while the banger is still warm to remove any remaining concentrate. Avoid letting residue cool and harden, as burnt carbon buildup is much harder to remove and will negatively affect flavor. For deeper cleaning, soak the banger in isopropyl alcohol for 20 minutes, rinse with clean water, and allow to dry fully before the next session.