GRAV Quartz Control Tower Banger – 10mm 45°

The GRAV Control Tower Banger features an elongated cylindrical quartz body welded to a dish base, creating a tall chamber with three directionally cut air intakes. Unlike the hourglass or hybrid bucket designs, the Control Tower uses a straight cylindrical column that provides ample height for inserts like terp pearls and pillars to move freely. The three air intakes are positioned and angled to generate a rotating airflow pattern, while the bottom-loading intake allows concentrate placement from below the chamber rather than from the top opening.

This banger has a 10mm male joint at a 45-degree angle, designed for use with any dab rig or water pipe featuring a 10mm female 45-degree joint. The 10mm configuration is typically found on compact and mini rigs. Before purchasing, confirm both the joint size and the angle on your rig, as an incorrect angle will cause the bucket to sit improperly and affect the performance of the bottom-loading intake and directional air intakes.

The bottom-loading intake refers to a small opening at the base of the cylindrical chamber through which concentrates can be loaded from below the dish. This design allows you to place your dab directly into the lower portion of the banger without needing a tool that reaches over the top edge of the tall cylindrical body. It makes handling more convenient and reduces the risk of concentrate waste from loading at awkward angles, particularly on a 45-degree rig where access angles can be more limited.

Yes, the elongated cylindrical design of the Control Tower Banger is specifically built to accommodate terp pearls and terp pillar inserts. The three directional air intakes generate a rotating airflow that keeps pearls moving within the chamber during inhalation. A terp pillar, which is a cylindrical quartz insert, can also be used to increase the surface area inside the chamber for concentrate vaporization. The GRAV Quartz Control Tower Banger Set (sold separately) includes a 20mm marble and a terp pillar for a complete setup.

The extended joint adds length between the banger bucket and the glass joint connection point on your rig. This additional distance keeps the torch flame and heat away from the borosilicate glass body of the rig during heating. Direct torch exposure to glass can cause thermal stress, cracking, or other damage over time. The extended joint is a standard feature across GRAV quartz bangers and is particularly important when using high-heat torches on compact rigs where the banger sits close to the rig body.

After each session, allow the banger to cool before cleaning. Use cotton swabs soaked in isopropyl alcohol to clean the interior of the cylindrical chamber, the dish base, and around the bottom-loading intake opening. The tall profile of the Control Tower may require a longer cotton swab to reach the base effectively. For stubborn residue, soak the banger in isopropyl alcohol for 30 to 60 minutes before rinsing with warm water and allowing to fully dry prior to the next use.