Pulsar Sipper Dual Use Concentrate or 510 Cartridge w/ Dry Cup

The Pulsar Sipper’s hands-free auto-fill system is revolutionary in vape bubbler technology. Load your concentrate in the triple quartz coil atomizer or attach a 510 cartridge. Double-tap the touchpad button on the base to activate auto-fill mode. An internal pump draws vapor into the detachable borosilicate glass bubbler cup, filling it with water-filtered clouds. Watch the vapor accumulate in the cup like a lava lamp. Once filled, the bubbler cup completely detaches from the base with vapor trapped inside. Sip at your pace without holding the device, or pass the filled cup to friends while keeping the base secure. Reattach the cup and double-tap again to refill. This innovative system eliminates awkward hose setups typical of water pipes while providing genuine water filtration for your dab pen or cartridge vaporizer.

No, the Pulsar Sipper accommodates either wax concentrates OR 510 oil cartridges at one time, not simultaneously. To use with concentrates, load your wax into the included triple quartz coil atomizer using the stainless steel dab tool, then attach the atomizer to the base. For 510 cartridges, remove the atomizer and thread your 0.5mL or 1mL cart onto the 510 connection. The device automatically optimizes performance for whichever attachment you’re using. The beauty of the Sipper is eliminating need for separate devices – switch between materials easily. Most users keep the atomizer installed for regular concentrate sessions and swap to cartridges occasionally. The dual-use versatility means one premium device handles all your vaping needs, whether you prefer wax, oil cartridges, or both at different times with your vaporizer bubbler.

The Pulsar Sipper provides four preset voltage settings indicated by LED colors. For wax concentrates in the triple quartz coil atomizer, start at medium-low voltage (around 2.8V-3.2V) to preserve terpene flavors while producing good vapor. Increase to higher settings (3.2V-3.6V) for thicker concentrates or bigger clouds. The quartz coil heats efficiently even at lower voltages. For 510 oil cartridges, begin at the lowest setting (2.4V-2.8V) for maximum flavor especially with high-quality live resin or distillate carts. Increase voltage gradually if vapor production seems insufficient. Higher voltages (3.2V-3.6V) work for very thick oils or when you want intense hits. The water filtration through the bubbler cup cools vapor considerably, allowing slightly higher temperatures without harshness. Experiment to find your sweet spot for each material type with this dual-use dab rig.

Cleaning the Pulsar Sipper is straightforward but essential for optimal performance and flavor. For the detachable borosilicate glass bubbler cup, rinse with warm water after each session and deep clean weekly by soaking in isopropyl alcohol for 30 minutes, then rinse thoroughly and air dry. Clean the triple quartz coil atomizer by gently wiping with alcohol-dampened cotton swabs – avoid submerging the entire atomizer. Use the preheat function after cleaning to burn off alcohol residue. For the base unit, wipe the exterior with a damp cloth and clean the 510 threading with cotton swabs. Never submerge the electronic base in liquid. Empty and refill any water reservoir regularly. The stainless steel dab tool cleans easily with alcohol. Proper maintenance preserves the water filtration quality and extends your concentrate vaporizer’s lifespan significantly.

The Pulsar Sipper’s robust 1500mAh battery provides exceptional session time – approximately 20-30 auto-fill cycles depending on voltage settings, material type, and fill duration. With typical use patterns (2-3 fills per session, once or twice daily), expect 3-5 days between charges for light users or 1-2 days for heavy users. Concentrates generally consume more power than cartridges due to higher heating demands. Higher voltage settings drain faster. The 10-minute inactivity auto-shutoff conserves battery life effectively. USB-C fast charging fully recharges in approximately 2-3 hours. The 1500mAh capacity is excellent for a premium vaporizer bubbler of this sophistication, providing reliable multi-day performance. For comparison, most dab pens offer 650-900mAh batteries with shorter session times. The Sipper’s generous battery ensures your bubbler vaporizer is always ready for group sessions or extended personal use.

The Pulsar Sipper commands a premium ($150-200 range) but delivers unique value unavailable in standard vaporizers. The hands-free auto-fill bubbler system is genuinely innovative – no other device offers this vapor-in-cup experience. Dual compatibility with both wax concentrates and 510 cartridges eliminates need for multiple devices. The water filtration provides smoother, cooler hits compared to direct vaping. The detachable bubbler cup’s social aspect – passing a filled cup rather than the device – adds unique functionality. Premium components include triple quartz coil, borosilicate glass, 1500mAh battery, and quality construction. For enthusiasts seeking the smoothest possible concentrate and cartridge experience with show-stopping innovation, the Sipper justifies its price. For basic vaping needs, standard dab pens or 510 batteries cost less but lack water filtration and unique features of this vaporizer bubbler.