The latest MIQRO has taken DaVinci’s reputation to the top, making it one of the most desirable products. Surprisingly, operating and cleaning DaVinci MIQRO is an easy process and requires minimal effort by the users. Today at Haze Smoke Shop will guide our followers on how to use and clean the DaVinci MIQRO.
Table of Contents
How to Use?
The device features three buttons. One is the power button while the other two up and down button controls temperature and smart paths. The user can customize the temperature settings according to their preference. There is also a boost mode that allows the user to increase the temperature for the last few hits’.Let’s start with the instructions on what steps you should take for the perfect experience!
Step 1: The first step is the opening of the chamber and filling it with a choice of herb.
Step 3: Once the device is turned on, use the power button to select the smart path, precision heating, or boost mode.
Step 4: Use the up and down button to select the temperature modes.
How do you know when to clean MIQRO?
Check your mouthpiece to see if there is any buildup of residue around it. If there is residue, gather your tools to clean your MIQRO. Do not use household cleaners and soap in the cleaning process as it will only destroy your device.
What do you need for cleaning your MIQRO?
The cleaning can be done using the MIQRO accessory kit. All you need for cleaning MIQRO is the following;
- Rubbing Alcohol Wipes
- Cotton Buds
- Cleaning Brush
- Metal Pick Tool
How to Clean?
Here’s a quick guide on how to thoroughly clean your DaVinci MIQRO!
Step 1: Start by removing the mouthpiece-lift the top lid, and remove the mouthpiece. Also, separate the gasket from the mouthpiece.
Step 2: Next, remove the flavor chamber using a metal pick tool underneath the top lid of the MIQRO-Insert the metal pick tool and lift the flavor path out of the MIQRO.
Step 3: To clean the heating chamber, open the bottom lid of the MIQRO and use the metal pick tool to remove all the used material inside the chamber.
Step 4: Next, use the chimney brush to sweep inside of the bowl.
Step 5: Once the heating chamber is free of residue, use a Q-tip dipped in isopropyl alcohol swab inside the bowl and around the pearl.
Step 6: Use isopropyl alcohol wipes to clean the loading area and pearl.
Step 7: Allow MIQRO to dry and perform a burn cycle before the next use.
Step 8: To clean the exterior of the MIQRO, Use a Davinci Cleaning cloth damp in water. Wipe the exterior and allow it to dry. Use isopropyl alcohol wipes to clean any residue left on the exterior.
Step 9: Finally, gather all the pieces in a small container and submerge them overnight. Rinse with warm water. Allow them to dry and reassemble.
DaVinci recommends to brush away residue from the heating chamber after every use.
Follow the instructions step by step to extend the life of DaVinci MIQRO and to get maximum results from the device!